Condensate out, heat in.

CCS and Thermogrooves

Discuss heating
Consultation

The invisible heat loss.

The problem

Conventional corrugating rolls without peripheral heating build up a condensate barrier inside. This barrier impedes heat transfer, lowers the outer surface temperature and causes cold spots along the roll length. You see the effect on the board: inconsistent bonding and waste after every restart.

Sectional model of a Friese corrugating roll with longitudinal Thermogrooves and siphon pipe

Channels that collect the water.

Thermogrooves

Friese corrugating rolls are the only ones that can be fitted with longitudinal Thermogrooves. They collect the condensate, which is then removed by our specially manufactured CCS. Because the water is collected in a targeted way instead of lying spread across the surface, heat transfer improves and the roll's surface temperature rises.

A siphon that does what it should.

Controlled condensate system

In our CCS, the collected condensate is drained via a siphon pipe. This pipe is guided by carbon bearings, so the distance to the roll bottom remains permanently at 2 mm. No readjustment is required. The steam head is designed to be maintenance-free for the entire life of the roll. You do not need to modify your existing steam system.

The system at a glance.

Technical data
Feature Design
Thermogrooves Longitudinal grooves in the pressure chamber of the roll
Siphon Guided by carbon bearings
Distance to roll bottom Permanently 2 mm
Readjustment Not required
Steam head Maintenance-free over the roll's service life
Intervention in the steam system No changes to the existing system required
Maintenance and adjustment Not required after correct initial installation

Four effects in operation.

What's in it for you

No banana effect

No thermal deformation after production stops, and therefore no waste.

No run-in phase

There is no run-in phase after a flute change.

Better heat transfer

Better heat transfer, even at higher speeds.

Maintenance-free

No maintenance and no adjustment over the life of the rolls.

How often does your line stop?

Your enquiry

Send us the number of stops per shift and your working width. That lets us estimate how much paper you currently lose after every start-up.

Please add 3 and 3.

Condensate, siphon, steam system.

Frequently asked questions.

This topic needs some explanation, because the problem sits inside the roll while the consequences show up on the board. Here are the questions we are asked most often.

Thermogrooves are longitudinal grooves inside a corrugating roll. They collect the condensate, which is then extracted via a siphon, so that no continuous condensate barrier can form.

CCS stands for Controlled Condensate System. It removes the condensate from the heated corrugating roll in a controlled way.

Condensate forms a barrier inside the roll that impedes heat transfer. The surface temperature drops, and cold spots develop along the roll length.

No. The Thermogrooves and CCS system works with your existing steam system; no changes to it are required.

Never. The siphon pipe is guided by carbon bearings and permanently maintains the 2 mm distance to the roll bottom. The steam head is also maintenance-free over the life of the roll.